MAZDA BT 50 Suspension (3" INCH LIFT KIT)

MAZDA BT 50 Suspension (3" INCH LIFT KIT)

Click to go to Store

MAZDA BT5 0 2012- 2016 True Suspension LIFT KIT 3” Front and REAR” – No Cheap Body LIFT
GAIN REAL GROUND CLEARANCE / 3" FRONT + 3" BACK 

email sales@daytona-cps.com

Mazda BT-50 2012- 2016 

TRUE SUSPENSION LIFT KIT   

3”  inches

GAIN REAL GROUND CLEARANCE / 3" FRONT + 3" BACK

DAYTONA-CPS

3" (= approx. 75mm) FRONT
+

3" (= approx. 75mm) REAR

COMBO SUSPENSION LIFT KIT

for Maxda BT-50  (2012, 2013, 2014-)

FITS ALL NEW Maxda BT-50 2012- 2016  MODELS

FOR 2 DOORS SINGLE CAB, 2 DOORS OPEN CAB AND 4 DOOR DOUBLE CAB

Lifts your Maxda BT-50 to allow for more ground clearance and bigger tires!

Our kits provide you with all the necessary parts to lift your truck! This is the best high quality lift kit for any truck enthusiast by using existing suspension components rather than cutting and welding costing you hundreds of dollars on top of the kit itself.

Pls. DO NOT CONFUSE OUR DAYTONA-CPS COMBO SUSPENSION LIFT KITS WITH CHEAP BODY LIFT KITS

Body lift kits only lift the body off the frame of a car and therefore offer no performance advantage other than tire clearance. 

Body lifts kits lead to the following problems: 

Ugly exposure of trailer hitches, ugly gaps between trucks frame and cab/bed, need to extend/adjust fuel filler hoses, steering column, engine cooling fan air guiding parts, etc.

Our DAYTONA-CPS suspension lift kit offers you clear performance advantages
by spacing down your vehicles factory suspension. 
This way you will get:

- Enhanced looks
- Increased tire clearance
enabling you to mount lager wheels/tires
- Increased ground clearance
resulting in improved off-road capabilities

Contents of our DAYTONA-CPS COMBO SUSPENSION LIFT KIT:

- 2x coil spacers  
CNC-manufactured – for 3” front lift**

- 2x 3" Rear Lift Leveler blocks
manufactured from heavy duty S235JR construction steel with  antirust coating

- 4x special prolonged leaf spring U-bolts
made from industrial grade carbon steel alloy

- All required nuts and fasteners

- Detailed English PDF Picture Diagram installation instructions .

** IMPORTANT NOTE: The lift / coil spacer thickness ratio is not 1:1. This means that the lift achieved lift height is much greater than the actual thickness of the coil spacers. The reason for this is that the lower control arm compounds the amount of lift due to its angle and length.  Front 3" represents lift amount, NOT the spacer thickness. This lift kit is designed to give you an overall lift of up to approximately 3 inches (75mm) front / 3 inches (75mm back).  This is the recommended maximum which you can lift your vehicle without affecting your vehicles driving characteristics in a negative way. An alignment is always recommended after altering the height of your vehicle. The rear lift requires that you add the blocks on the 4WD models and 2WD models . Installation should only be performed by trained professional

Our Daytona Full Lift Kits are precision engineered to lift and or level your truck. Our offerings include various size combinations for the front and rear so you can change or customize your truck to the required ride height. If there’s something you require, please message us and we’ll be happy to put an offer together  for you!

The Ford Ranger, code-named T6, is a mid-size pickup truck produced by the Ford Motor Company. The T6 replaces two regional Ranger platforms: the Mazda BT-50-derived model sold in the Latin America, Europe, and Asia-Pacific regions and the North American model sold in select Latin American markets. Ford's affiliate, Jiangling Motors builds a model based on the Ford Ranger called the JMC Yuhu for the Chinese market.

Although the T6 Ranger is sold in 180 countries, it is not currently planned to be sold in Canada and the United States, But some have been imported in lately , due to the new platform being too close in size and cost to the F-150, and due to overall declining sales of compact pickups in North America. However, it is offered in the Middle East, Mexico, Suriname, Ecuador, Peru, the Netherlands (Aruba, Curaçao, and St. Marteen), the Cayman Islands and most Caribbean countries in addition to the F-150.

Manufacturer  Ford Motor Company

Production      2011–2016  Assembly    Rayong, Thailand (AAT), Silverton, South Africa

Buenos Aires, Argentina (Ford Argentina)

NEW FORD RANGER T6 2012- 2014 True Suspension LIFT KIT 2” Front and REAR” –

 NEW  FORD RANGER T6 2012- 2016 

True Suspension LIFT KIT 3” Front and REAR” – No Cheap Body LIFT

GAIN REAL GROUND CLEARANCE / 3" FRONT + 3" BACK  

Click to go to STORE

sales@daytona-cps.com

FORD RANGER T6 2012- 2016 TRUE SUSPENSION LIFT KIT 3” inches & Mazda BT-50

GAIN REAL GROUND CLEARANCE / 3" FRONT + 3" BACK & BT-50

FORD RANGER T6 2012- 2016 

TRUE SUSPENSION LIFT KIT   

3”  inches

GAIN REAL GROUND CLEARANCE / 3" FRONT + 3" BACK

DAYTONA-CPS

3" (= approx. 75mm) FRONT
+

3" (= approx. 75mm) REAR

COMBO SUSPENSION LIFT KIT

for FORD RANGER T6 (2012, 2013, 2014-)

FITS ALL NEW FORD RANGER WILDTRAK 2012, 2013, 2014- MODELS

FOR 2 DOORS SINGLE CAB, 2 DOORS OPEN CAB AND 4 DOOR DOUBLE CAB

Lifts your Ranger T6 to allow for more ground clearance and bigger tires!

Our kits provide you with all the necessary parts to lift your truck! This is the best high quality lift kit for any truck enthusiast by using existing suspension components rather than cutting and welding costing you hundreds of dollars on top of the kit itself.

Pls. DO NOT CONFUSE OUR DAYTONA-CPS COMBO SUSPENSION LIFT KITS WITH CHEAP BODY LIFT KITS

Body lift kits only lift the body off the frame of a car and therefore offer no performance advantage other than tire clearance. 

Body lifts kits lead to the following problems: 

Ugly exposure of trailer hitches, ugly gaps between trucks frame and cab/bed, need to extend/adjust fuel filler hoses, steering column, engine cooling fan air guiding parts, etc.

Our DAYTONA-CPS suspension lift kit offers you clear performance advantages
by spacing down your vehicles factory suspension. 
This way you will get:

- Enhanced looks
- Increased tire clearance
enabling you to mount lager wheels/tires
- Increased ground clearance
resulting in improved off-road capabilities

Contents of our DAYTONA-CPS COMBO SUSPENSION LIFT KIT:

- 2x coil spacers  
CNC-manufactured – for 3” front lift**

- 2x 3" Rear Lift Leveler blocks
manufactured from heavy duty S235JR construction steel with  antirust coating

- 4x special prolonged leaf spring U-bolts
made from industrial grade carbon steel alloy

- All required nuts and fasteners

- Detailed English PDF Picture Diagram installation instructions .

** IMPORTANT NOTE: The lift / coil spacer thickness ratio is not 1:1. This means that the lift achieved lift height is much greater than the actual thickness of the coil spacers. The reason for this is that the lower control arm compounds the amount of lift due to its angle and length.  Front 3" represents lift amount, NOT the spacer thickness. This lift kit is designed to give you an overall lift of up to approximately 3 inches (75mm) front / 3 inches (75mm back).  This is the recommended maximum which you can lift your vehicle without affecting your vehicles driving characteristics in a negative way. An alignment is always recommended after altering the height of your vehicle. The rear lift requires that you add the blocks on the 4WD models and 2WD models . Installation should only be performed by trained professional

Our Daytona Full Lift Kits are precision engineered to lift and or level your truck. Our offerings include various size combinations for the front and rear so you can change or customize your truck to the required ride height. If there’s something you require, please message us and we’ll be happy to put an offer together  for you!

The Ford Ranger, code-named T6, is a mid-size pickup truck produced by the Ford Motor Company. The T6 replaces two regional Ranger platforms: the Mazda BT-50-derived model sold in the Latin America, Europe, and Asia-Pacific regions and the North American model sold in select Latin American markets. Ford's affiliate, Jiangling Motors builds a model based on the Ford Ranger called the JMC Yuhu for the Chinese market.

Although the T6 Ranger is sold in 180 countries, it is not currently planned to be sold in Canada and the United States, But some have been imported in lately , due to the new platform being too close in size and cost to the F-150, and due to overall declining sales of compact pickups in North America. However, it is offered in the Middle East, Mexico, Suriname, Ecuador, Peru, the Netherlands (Aruba, Curaçao, and St. Marteen), the Cayman Islands and most Caribbean countries in addition to the F-150.

Manufacturer  Ford Motor Company

Production      2011–2016  Assembly    Rayong, Thailand (AAT), Silverton, South Africa

Buenos Aires, Argentina (Ford Argentina)

Body and chassis, Class       Mid-size pickup truck , Body style        2-door single cab

2-door extended cab, 4-door double cab, Front-engine, rear-wheel-drive or four-wheel-drive ,

Related   Mazda BT-50 , JMC Yuhu

            FORD RANGER T6 2012- 2014 

True Suspension LIFT KIT 4” Front and REAR” – No Cheap Body LIFT

GAIN REAL GROUND CLEARANCE / 4" FRONT + 4" BACK  

Direct link to Web Store

sales@daytona-cps.com

FORD RANGER T6 2012- 2016 

TRUE SUSPENSION LIFT KIT   

4”  inches

GAIN REAL GROUND CLEARANCE / 4" FRONT + 4" BACK

DAYTONA-CPS

4" (= approx. 100mm) FRONT
+

4" (= approx. 100mm) REAR

COMBO SUSPENSION LIFT KIT

for FORD RANGER T6 (2012, 2013, 2014-)

FITS ALL NEW FORD RANGER WILDTRAK 2012, 2013, 2014- 2016 MODELS

FOR 2 DOORS SINGLE CAB, 2 DOORS OPEN CAB AND 4 DOOR DOUBLE CAB

Lifts your Ranger T6 to allow for more ground clearance and bigger tires!

Our kits provide you with all the necessary parts to lift your truck! This is the best high quality lift kit for any truck enthusiast by using existing suspension components rather than cutting and welding costing you hundreds of dollars on top of the kit itself.

Pls. DO NOT CONFUSE OUR DAYTONA-CPS COMBO SUSPENSION LIFT KITS WITH CHEAP BODY LIFT KITS

Body lift kits only lift the body off the frame of a car and therefore offer no performance advantage other than tire clearance. 

Body lifts kits lead to the following problems: 

Ugly exposure of trailer hitches, ugly gaps between trucks frame and cab/bed, need to extend/adjust fuel filler hoses, steering column, engine cooling fan air guiding parts, etc.

Our DAYTONA-CPS suspension lift kit offers you clear performance advantages
by spacing down your vehicles factory suspension. 
This way you will get:

- Enhanced looks
- Increased tire clearance
enabling you to mount lager wheels/tires
- Increased ground clearance
resulting in improved off-road capabilities

Contents of our DAYTONA-CPS COMBO SUSPENSION LIFT KIT:

- 2x coil spacers  
CNC-manufactured – for 4” front lift**

- 2x 4" Rear Lift Leveler blocks
manufactured from heavy duty S235JR construction steel with  antirust coating

- 4x special prolonged leaf spring U-bolts
made from industrial grade carbon steel alloy

- All required nuts and fasteners

- Detailed English PDF Picture Diagram installation instructions .

** IMPORTANT NOTE: The lift / coil spacer thickness ratio is not 1:1. This means that the lift achieved lift height is much greater than the actual thickness of the coil spacers. The reason for this is that the lower control arm compounds the amount of lift due to its angle and length.  Front 4" represents lift amount, NOT the spacer thickness. This lift kit is designed to give you an overall lift of up to approximately 4 inches (100mm) front / 4 inches (100mm back).  This is the recommended maximum which you can lift your vehicle without affecting your vehicles driving characteristics in a negative way. An alignment is always recommended after altering the height of your vehicle. The rear lift requires that you add the blocks on the 4WD models and 2WD models . Installation should only be performed by trained professional

Our Daytona Full Lift Kits are precision engineered to lift and or level your truck. Our offerings include various size combinations for the front and rear so you can change or customize your truck to the required ride height. If there’s something you require, please message us and we’ll be happy to put an offer together  for you!

The Ford Ranger, code-named T6, is a mid-size pickup truck produced by the Ford Motor Company. The T6 replaces two regional Ranger platforms: the Mazda BT-50-derived model sold in the Latin America, Europe, and Asia-Pacific regions and the North American model sold in select Latin American markets. Ford's affiliate, Jiangling Motors builds a model based on the Ford Ranger called the JMC Yuhu for the Chinese market.

Although the T6 Ranger is sold in 180 countries, it is not currently planned to be sold in Canada and the United States, But some have been imported in lately , due to the new platform being too close in size and cost to the F-150, and due to overall declining sales of compact pickups in North America. However, it is offered in the Middle East, Mexico, Suriname, Ecuador, Peru, the Netherlands (Aruba, Curaçao, and St. Marteen), the Cayman Islands and most Caribbean countries in addition to the F-150.

Manufacturer  Ford Motor Company

Production      2011–2016  Assembly    Rayong, Thailand (AAT), Silverton, South Africa

Buenos Aires, Argentina (Ford Argentina)